Needle Valves

Our organization is engaged in offering a comprehensive range of Stainless Steel Needle Valves HP Series. These are developed after extensive research to deliver defect free range of special purpose severe service valves. Further, the steam threads rolled and hard plated and tip stellited prevent galling and extends the working life.

 

 

Features:

• Union Bonnet or Screwed Bonnet Connection
• Metal to metal or stellited seat for high pressure
• 2 parts stem tip arrangements
• Packing below actuating thread, non-rotating ensures bubble tight shut-off
• Variety of end connections include Male or
• Female threaded NPT, BSP, ISO, DIN and JIS tapered pipe ends
• One piece body, without welds
• Maximum Working Pressure: 10,000 PSI (400 bar) at 200oC. 20,000 PSI (700 bar) at 120⁰ C.
• 100% factory tested

With our domain expertise, we are engaged in offering an extensive range of Stainless Steel Needle Valves IB Series. These valves find application area where the flow of high pressure, abrasive laden mediums needs to be controlled. Available in different technical specification our range can also be customized as per the specifications given by our clients.

 

Features:

• Forged or bar stock body construction.
• Straight or Angle Pattern with Panel Mounting optional
• Metal to Metal or Stellited seats
• Stem threads rolled and hard plated and tie stellied (Vee Regulating one piece or non-regulating) or non-rotating ball tip optional
• 2 piece chevron packed offers zero leak, sealing over conventional packing design
• Variety of end connections include "PIONEER" single or twin ferrule tube fittings, Male or Female N. P. T. and I. S. O., DIN and JIS tapered pipe ends
• Maximum Working Pressure: 6000 PSI (400 bar) at 200⁰C. 10000 PSI (700 bar) at 120⁰ C.
• 100% factory tested

 

Data Sheet:

 

End Connection	Model No
Female Female	PNV-IB-FF
Male Female	PNV-IB-MF
Tube OD	PNV-IB-ODT

Our organization is involved in offering an extensive range ofBrass Needle Valves, which is manufactured in compliance with the international quality standards. These needle valves have metal to metal seats with fine threaded screw down, which enables in the excellent sealing up to the capacity of the valve. Our entire range is fabricated from forged brass body with SS304 spindle and teflon washer that ensures extended working life. Further, these Brass Needle Valves are also chrome plated.

 

Specifications:

 

Working Pressure Ranges	Valves are designed to withstand up to 150 PSI
Needle Valves Installation Instructions	All Needle valves should always be installed with the pressure against the seat
Availability of Sizes	Available in 1/4 BSP, 3/8 BSP, 1/2 BSP sizes In form of Male to Male, Female to Female Male to Tube, Female to Tube

With our domain expertise in the respective field of work, we are engaged in offering a wide range of Check Valves. These are specially designed & manufactured to control the flow of fluids and gases in corrosive & hazardous environment. Our range is widely used in process control, instrumentation and flow control applications. These valves are known for durability and maximum efficiency. This helps to provide high quality and low cost alternatives in fluid and gaseous control systems of different applications.

 

Features:

• Available in high grade stainless steel, bass materials
• Variety of end connections includes Male/Female threaded NPT, BSP, BSPT, ISO, DIN and JIS tapered pipe ends
• 100% factory tested for both crack & reseal
• Complete heat traceability
• Pressure / Temperature Ratings
• Pressure Rating
• 316SS, 1/8 to 3/4"- 5000 psig CWP (345 bar) 13000 psig CWP (207 bar)
• Brass 1/8to 1 3000 psig CWP (207 bar)

 

Working Temperatures:

• Viton seal -15° F to 375° F (-26°C to 190°C)
• Fluorocarbon Rubber -15° F to 400° F (-26°C to 204°C)
• Buna N Rubbe -30° F to 275° F (-34°C to 135° C)
• Neoprene Rubber -45° F to 250° F (-43°C to 121°C)

Data Sheet::

End Connections	Model No
Female x Female	PCV-X-S-FF
Male x Male	PCV-X-S-MM
OD x OD	PCV-X-S-ODT

We offer an extensive range of Gauge Root Valves, which is designed for connecting system impulse line & transmitters. These valves consists single valve configuration that allows for easy isolation, calibration, block and bleed for gauges, pressure switches and static pressure transmitting instruments. Our range is rugged in construction that helps to withstand high pressures and temperatures.


Features:

• Rated for pressures as high as 6000 PSI at 2000F or 4000 PSI at 5000F, with PTFE packing
• For a higher temperatures grafoil packing is used
• Combine the functions of a tee, calibration valve and isolation valve
• All tubing and fittings into a single compact unit
• Reduces the number of fittings and space required for installation

Data Sheet :

• Standard : PGRV-H-S-88-MF-137mm
• Extended : PGRV-H-S-88-MF-184mm

Features :

• Hex Bar stock Body construction.
• Straight or Angle Pattern with Panel Mounting optional.
• Metal to Metal or Stellited seats. Stem threads Rolled and hard plated and tie stellied (Vee Regulating one piece or non-regulating) or non-rotating ball tip optional.
• 2 piece Chevron packed offers zero leak, sealing over conventional packing design.
• Variety of End connections include "PIONEER" single or twin ferrule tube fittings, Male or Female N. P. T. and I. S. O., DIN and JIS tapered pipe ends.
• Maximum Working Pressure : 6000 PSI (400 bar) at 200^oC. 10000 PSI (700 bar) at 120^oC.
• 100% Factory tested.

Data Sheet :

• End Connections- Model No
• Female X Female - PNV-H-S-FF
• Male X Female - PNV-H-S-MF
• Male X Female with Vent - PBB-H-S-MF