Pneumatic Valves and Cylinders

The wide range of pneumatic Valves offered by us is includes Solenoid Valves, Slide Valves, Swivel Flow Control Valve and other Valves. Our entire range adheres to international standard to ensure flawless range in the end product. These valves are used for on and off at the entrance of pneumatic circuit. Further, we can design these valves as per the technical specifications provided by our clients.

Solenoid Valves

We are engaged in manufacturing and exporting a wide range of Solenoid Valves, which is largest selection of 2-way, 3-way and 4-way solenoid valves. These are designed to handle the most demanding fluid control applications for air, gases and oils. The range includes 2/2 way, 3/2 way, which is normally closed and open, 4/2 way, 5/2 way and both direct and pilot operated solenoid valves. These solenoid valves are developed to suit the actual working conditions, thus these are manufactured using advance technology.

Send Enquiry

3 Way and 4 Way Valves

The extensive range of 3 way Valves offered by us is available in various models and technical specifications. These 3 way and 4 way valves are used to regulate the flow of liquids through a sequence of pipes. Our range is known for sturdy and abrasion resistant features, due to which these find application in numerous industrial applications.

SERIES 'S'- 3 Way (3 PORT) AND 4 WAY (5 PORT) HAND LEVER VALVE:

Technical specifications:

Types: 2 Positions & 3 Positions, PHN, PRN, PAN.
Sizes: 11/4" BSP, 1/2" BSP, 3/4" BSP
Pressure: 0 to 10 kg / cm2
Media: AIR-Filtered and Lubricated
Body Material: Powder coated Aluminum body

(Other Models Foot Pedal Valve, Roller Valve, Disc Rotary Valve, Pilot - Pilot Valve)

SERIES 'S'- 3 Way (3 PORT) AND 4 WAY (5 PORT) PUSH PULL VALVE

Technical specifications:

Types: 2 Position & 3 Position , PHN, PRN, PAN
Sizes: 1/4" BSP, 1/2" BSP, 3/4" BSP
Pressure: 0 to 10 kg / cm2.
Media: AIR-Filtered and Lubricated
Body Material: Powder coated Aluminum body.

The other valves and the specifications are given below:

Low Control Valve	Sizes: 1/8" BSP, 1/4" BSP and 1/2" BSP.
Rotary Valve	Sizes: 1/4" BSP and 1/2" BSP
Quick Exhaust Valve	Sizes: 1/4" BSP and 1/2" BSP.

Send Enquiry

Slide & Swivel Flow Control Valve

These flow control valves are used for on and off at the entrance of pneumatic circuit.

Advantages

It releases out compressed trapped air from pneumatic closed circuit at shut off position and avoid accidents.

Installation Instructions

All slide valves should always be installed, air inlet from male threading and pneumatic close circuit to female threading.

Working Pressure

Valves are designed to withstand working pressure up to 150 PSI.

Availability Of Sizes

Available in 1/4" BSP, 1/2" BSP.

Send Enquiry

Pneumatic Cylinders

Materials of Construction

End caps - Aluminium diecast / Cast Ion
Tie rod - Tensile Steel Zinc Plated
Piston - Aluminium machines
Cylinder Tube - Upto dia 4"(100mm) in brass, dia 5"(125 mm) & above upto dia 12 M.S. seam less honed & hard Chrome plated.
Piston Rod - High Tensile Steel Hard Crome Plated
Seals - High Nitrile 3307

Features

Heavy duty & Robust constructions.
Single & double acting models are available in Ten bore sizes from 25mm to 200mm.
Adjustable cushioning for reducing impact of stroke at both cylinder ends is standard for all models. (Bore more than 1")
Selection of attachments for six mounting styles.
Super finished and hard-chrome plated high tensile steel piston rods.

Pressure Temperature

Operating pressure upto 10kg f/cm2 for air upto 25kg f/cm2 for oil
Operating Temperature Max. 80o c.

Mountings - Suffix

Rear Flange - RF : Front Trunion - FT
Rear Trunion - RT : Centre Trunion - CT
Clevis Mounting - CM : Front Flange - FF
Foot Mounting - FT : Neck Mounting -NM
For piston Rod Fork Attachment Suffix - RK.

Send Enquiry