Brass Fittings

Product Details:

Brass Pipe Fittings are available in various material grades, and coatings/plating’s are available. We’ve got the right product for your needs.

Product Details:

With the assistance of our technical team of experts, we are engaged in offering a wide range of Brass Pipe Fittings. These fittings are widely appreciated by our clients for simple construction, efficiency, low cost and ease of assembly. 

Product details:

We offer different types of compression and pipe fittings such as:

• Brass compression tube fittings: Male stud, stud elbow, run tee, branch tee, female run tee, female branch tee, female branch tee, female elbow, female stud,
• Tube to tube fittings- elbow, tee, bulkhead,
• Ferrul and nut- ferrul10, nut
• Pipe fittings: Male female elbow , union elbow, street elbow, reducing street elbow, 45° street elbow, union tee , male run tee, union cross, union coupling
• bushing, reducing bushing, close nipple, long nipple, hex nipple, reducing nipple, plug, slotted head plug, adapter, lock nut, cap.

These brass compression fittings and pipe fittings are available in different dimensions:

• Sizes- 2 - 25 tube o. D. T mm
• Thread - 1/8 to 1 npt

Working pressure ranges:

• Temperature and type of tubing used are important factors. However, the following table is good guide for proper selection at temperature 60 f.

Applications:

• Use with copper, brass and aluminium. Not recommended for steel tubing manufactured for low & medium pressure tubing connection work where excessive vibrations or tube movement is not involved. This fittings is widely used for connecting gasoline, grease, oil, water, vacuum and air lines.

For More Details please refer PDF file attached under the photograph.

Product Details:

Size

Fittings available :

Straight Connectors, Stud Elbow, Branch Tee, Run Tee, Female Stud, Union-Straight Elbow Tee - Available in above tube size & thread size combination. Maximum Working Pressure :1000 psi

Compatible Tubing :

All types of seamed and seamless metal tubing Copper, Aluminum, Thin Wall Steel (Bundy or G.M.), Stainless Steel and Glass.

Assembly Instructions For Lower pressure Applications :

Slip tube nut and sleeve over tube. Insert tubing in fitting body as far as it will go and tighten nut until stop is reached.Cut the tube cleanly and squarely removing all burns. There is no danger of overt-tightening. The elastic sleeve ordinarily will extrude slightly around the tube at the end of the nut. This extrusion further aids in isolating the tube from the nut.

Assembly Instructions For Higher pressure Applications :

Consult pressure chart to determine if tubing should be belled for your particular application. FIG A. Slip the nut and sleeve over tubing. The sleeve should be positioned near end of tubing Applications just behind the surface to be belled. FIG. B. Bell tubing with standard 45 o flaring tool or 90 o punch. The size of bell should be approximately that shown in FIG. C.

Remark Instructions :

All Vibra-Lok fittings can be reassembled repeatedly. New sleeves can easily be added to retain original fitting performance.

In high Pressure applications & Sizes larger than 1/2" OD, the tube end should belled or flared.

Product Details:

The Compression fittings are extensively use because of it's simplicity, efficiency, low cost and easy of assembly.

Assembly Instructions

1. Slide nut, Sleeve onto tubing. The thread end of the nut must face out.
2. Insert the tube into the fitting. Be sure the tube is bottomed on the fitting shoulder.
3. Assemble nut to body, and tighten the nut.
Materials-Elbow and Tees

Brass forgings-Pioneer compression fittings are made from BS-218 material. The exceptional strength of forge fittings (Over 80% stronger than castings) provides an extra safety factor.

Connectors, Unions and Nuts

Stress relieved brass bar stock-BS-249.

Temperature Ranges

From - 65oF - 250oF

Vibration

Fair resistance to vibration or tube movement, depending on applications involved. Use long nut for additional resistance to vibration.

Applications

Use with copper, brass and aluminium. Not recommended for steel tubing manufactured for low & medium pressure tubing connection work where excessive vibrations or tube movement is not involved. This fittings is widely used for connecting gasoline, grease, oil, water, vacuum and air lines

Working Pressure Ranges

Temperature and type of tubings used are important factors. However, the following table is good guide for proper selection at temperature 60 F.

      PSI          TUBE          Tube Wall
                      O.D.(in)             (in)
      400             1/8                . 030
      400            3/16               . 030
      300            1/4                 . 030
      300            5/16               . 032
      200            3/8                 . 032
      200            1/2                 . 032
      150            5/8                 . 035
      100            3/4                 . 035
        75            7/8                 . 035

 

Ordering Information

To order, simply specify catalogue number for configuration and size desired.

Example

 

1/4" tube X 1/4" BSP

Product Details:

Backed by the vast industry experience, we are offering Union Coupling from our wide array of Brass Pipe Fittings. 

Features:

• Robust design
• Long service life
• Precision engineered

Product Details:

Our organization offers an extensive range of Vibra Lok Fittings and 45 and degree fittings, which is manufactured in line with the relevant industry standards. These fittings help the indestructible joints to withstand extreme shock and major tube movements. The tubing is cushioned against damage as theses are provided with an elastic sleeve. Our range is fabricated from special composition buna-n elastic sealing material, which forms the cushion between tubing and fitting. 

We offer different types of vibrant - look such as:

• Assembled without belled tube, assembled with belled tube

Fittings available :

• Straight connectors, stud elbow, branch tee, run tee, female stud, union-straight elbow tee - available in above tube size & thread size combination.

Sleeves:

• Special elastic sealing material buna-n used for temperatures from sub-zero to 275of / 135oc. The sleeve has extreme resistance to deterioration by oil and gasoline. high-temperature sleeves made of viton for use from sub-zero to 450of / 232oc. Sleeves are compatible for gasoline, oil, diesel fuel, lubricants, vacuum, air and water service.

Compatible tubing:

• All types of seamed and seamless metal tubing copper, aluminum, thin wall steel (bundy or g. M. ), stainless steel and glass.

Product Details:

We have gained immense knowledge and experience of the domain and are offering Male Elbow from our gamut of S.S. Tube Fittings, Stainless Tube Fittings, and Stainless Steel Pipe Fittings. These are made from premium-grade raw materials under stringent quality controls by using state-of-the-art technologies.

Features:

• Robust construction
• Accurate dimensions
• Precision engineered

Additional Information:

• Item Code: PME

Product Details:

Brass Pipe Fittings are available in various material grades, and coatings/plating’s are available. We’ve got the right product for your needs.

Product Details:

For Connecting

Cut the tube for required length by tube cutter and push the tube on the core of the fitting and tighten the nut by hand.

For Disconnecting

Loose the nut and pull tube out.

No Tools Needed for Tubing Installation

No wrenches, haring tools, benders or other tools are used for tube installation.

Reduce Installation Time and Labour Cost

AIR-O-FIT Fittings offer a minimum of 36% saving in installation time, compared to regular compression type fittings.

Excellent Holding Power

The AIR-O-FIT fittings when assembled finger tight on polyethylene or P.V.C. tubing will hold the burst pressure of the tubing itself.

Pipe Swivel Possible

By loosing nut slightly pipe can be swivel on its own by 3600 as per required direction.

Material

Elbows and Tees : Brass Forging (as per B.S.218) / Aluminium / Acetal copolymer (Celcon).
Connectors : Unions / Female Studs : Stress relieved brass bar stock ( as per B.S. 249) / Aluminium / Acetal Copolymer (Celcon)

Pipe Thread

British standard pipe threads (Parallel). Also available MM threads on 4mm OD tube fitting

Operating Medium

Compressed air, light gases, water, lubricating oil.

Working Pressure

Vacuum to 10 Bar (depend upon bursting pressure of tube).

Working Temperature

10o C to + 45o C (For Polyethylene tubing)
10o C to + 60o C (For Polyurethane tubing)
10o C to + 80oC (For Nylon tubing)

Ordering Information

To order, simply specify catalogue number for configuration and size desired.

Example

6mm tube X 1/4" B.S.P. Male connection Code No. A 2006 _______________ Brand of fittings (AIR-O-FIT) '' _____________ Thread Size '' '' ____________ Type of fitting '' '' '' ___________Pipe Size A2 0 06

Additional Information:

• Delivery Time: 1 week

Product Details:

The wide range of Brass Tube Fittings offered by us is fabricated from the high-grade raw material to ensure durability, strength, and corrosion resistant features in the end product. 

We offer different types of air-o-fit such as:

Air-O-fit :

• Male stud, stud elbow, distributor hollow bolt, female tee, distributor ring piece, female elbow, female stud, banjo, reducing nipple, pipe, coupling, double nipple.

Tube fittings:

• Coupler, elbow, tee, cross, blanking cap for fitting, bulk head

Product Details:

We are offering our clients, quality Brass Tubing Fittings that serve the needs of various industries. These tubes are highly resistant to corrosion, abrasion and high temperatures. We offer our Brass Tubing in standard as well as customized specifications as per the client.

Admiralty Brass Tubing

• Admiralty Brass Tubing for evaporators and coolers are renowned for their characteristic of superior corrosion resistance in a moderately polluted river water and clean seawater, both stagnant or slow moving water. These Brass Tubings constitute 30% zinc and 1% tin and arsenic as well.

Brass Tubing For Furniture and Lightning Work

• For decades, the excellent performance of copper tubing has been well established in a variety of industries including; furniture, architectural grill, lightning work & much more.

Brass Tubing For Engineering Industry

• General Engineering industry requires more brass tubing fittings than any other industry in applications such as pipes made of brass for plumbing, cable glands, brass grease nipples as well as brass hot stamped components, hose fittings brass & others components.

Brass Tubing For Sanitary Fittings and Hotel Industry

• Previously plastic and steel used to be the most used material for the manufacturing of all the above mentioned industry equipment, but with the changing scenario metals like brass, aluminium, nickel etc. have captured a lot of market in this domain.

Send Bulk Enquiry

Product Details:

Various kind of Adaptor is provided by us, which are made us of best quality material. We procured raw material for manufacturing products form the most reliable and authentic merchant.